POWER HACK SAW BLADES
Ko-Bi
HSS Bi-Metal, standard tooth; 0° rake angle
All-round saw blade.
Manufactured from high-speed steel, laser welded to a spring back, these bimetal blades are able to withstand heavy feed pressures, giving economical, high cutting rates.
Because these blades are virtually unbreakable in normal use, they are particularly safe and therefore suitable for use by unskilled operators or on older machines.
Other dimensions available on request.
Ko-Bi VP7
HSS Bi-Metal, variable tooth spacing; 7° positive
For stainless steels and other tough materials which produce long chips.
Manufactured from high-speed steel, laser welded to a spring back, these bimetal blades are able to withstand heavy feed pressures, giving economical, high cutting rates.
Virtually unbreakable in normal use.
Variable tooth spacing reduces vibration and the blade lives longer.
Optimum tooth geometry with variable spacing ensures a clean low-vibration cut at minimum noise level.
Variable tooth spacing allows a wider range of applications. Less frequent change of saw blades required.
Pilot teeth produce a more straight cut.
Other dimensions available on request.
HSS-SB5
HSS Universal (Aisi M2); ALLHARD, standard tooth 0 °
Universal saw blade
- Our universal saw blade for most cutting areas.
- Uncomplicated design, robust and reliable, but with maximum tool life even in the top toughness range.
Manufactured with modern equipment, vacuum heat treated and steam tempered.
Other dimensions available on request.
HSS-P7
HSS (AISI M2); ALLHARD; hook tooth 7° positive
For tough materials and materials which produce long chips.
HSS-Aisi M2 is filling the space between the universal saw blade and the special saw blade.
Optimum results for cutting structural steels, case hardened steels and tempered steels up to a toughness of about 800 N/mm².
An addition for stainless steels with a cross section of less than 50 mm or a pipe wall of less than 10 mm with appropriate tooth spacing.
Other dimensions available on request.
HSS VP7
HSS (AISI M2); ALLHARD, variable tooth spacing 7° positive
Variable tooth spacing reduces
vibration and the blade lives longer!
For quality cutting with maximum performance
Optimum tooth geometry with variable spacing ensures a clean low-vibration cut at minimum noise level.
For tough materials and materials which produce long chips.
The toothing with a positive rake of 7° allows most materials to be cut more quickly.
Pilot teeth produce a straight cut.
Variable tooth spacing means that the saw blades need to be changed less frequently as a result of the large range of applications.
Other dimensions available on request.
HSS P13
HSS (AISI M2); ALLHARD,, hook tooth 13° positive
For cutting stainless and acid-resisting steel
The increased use of stainless and acid-resisting steels (e. g. VA steels) requires an appropriate saw blade for cutting these difficult materials
As a result of the perfect cutting edge geometry, excellent cutting results are achieved. With 13° positive rake produces optimum penetration of the material to be sawn.
The economical cutting of VA pipes with walls from 10 mm is no problem.
Other dimensions available on request.
Direction for application
tooth spacing:
- 3 teeth/inch for cross sections from 50 - 200 mm (pipes with walls from 10 mm)
- 2 teeth/inch for cross sections from 150 mm
cutting speed:
- stainless and acid-resisting steels: 10 to 20 m/min
HSS-E
HSS Cobalt (AISI M35); ALLHARD; standardtooth 0°
Made of HSS-Cobalt M35 steel. A hardness of 67° Rockwell and 8% cobalt allows user to cut extreme hard materials of more than 120 kp/mm² toughness.
Other dimensions available on request.
© 2018 | All rights reserved.